First a video re “Harvesting Persimmon 1 of 2”, then some pics of the project (below the video):
Harvesting Persimmon 1 of 2 (video):
From the project (pics):
Our neighbor’s Hachiya persimmon tree, with its lower branches picked clean. What a treat to have fruit ripen so late in the year, on this December day.
Hachiya persimmon harvested on a frosty day. The green-before-turning leaves take on beautiful colors before the fruit ripens and are easy to press – perhaps placemats for your dried persimmon treats!
Close-up of harvested Hachiya persimmons. These almost ripe persimmons, with firm flesh, will soften to a near jelly state if left to ripen by a window.
First a video re “Bucket Watering Can DIY 4 of 4”, then some pics of the project (below the video):
Bucket Watering Can DIY 4 of 4 (video):
From the project (pics):
New and Improved watering can (model 000000000000000002) has smaller holes. A smaller spout stream helps distribute the water more evenly and is less harsh on bare soil and fragile seedlings.
A look inside the watering can ready for application. Note the floating food particles that would clog up the spout to an ordinary watering can. THIS is no ordinary watering can!
Watering with finer spout holes. Mission accomplished – the new watering streams are less sloppy than the larger-holed watering can.
Happy DIY projects for your Habitat Food Forest. See you tomorrow.
First a video re “Bucket Watering Can DIY 3 of 4”, then some pics of the project (below the video):
Bucket Watering Can DIY 3 of 4 (video):
From the project (pics):
Filling the watering can with dishwater (blackwater). Check out that water! It’s a mix of soapy water, food particles from our dishes, and pasta drain-off water. Here microbes, come and get it!
Diluting the dishwater with fresh water. We’ll get more coverage in the garden by adding fresh water to the nutrient “concentration”.
Watering the garden with our new watering can. Note the use of the fill hole as handle grip. It works! And, easy to clean.
Happy DIY projects for your Habitat Food Forest. See you tomorrow.
First a video re “Bucket Watering Can DIY 2of 4”, then some pics of the project (below the video):
Bucket Watering Can DIY 2 of 4 (video):
From the project (pics):
Cutting a fill hole in the bucket’s lid. The large hole allows filling the watering can easily AND can be used as a non-moving grip while watering garden.
Finding center opposite the watering can’s grip (the fill hole). The bucket was then flipped 180 degrees to locate the center of the holes to be drilled.
Spout holes are drilled to both the right and left of the center mark hole. The more holes, the wider the watering row-of-streams will be.
Happy DIY projects for your Habitat Food Forest. See you tomorrow.
First a video re “Bucket Watering Can DIY 1 of 4”, then some pics of the project (below the video):
Bucket Watering Can DIY 1 of 4 (video):
From the project (pics):
Setting up project space for converting a 5 gallon bucket (left foreground) into a dishwater watering can. Note our kitchen sink wash bucket (back of table) patiently waiting to be emptied into the new watering can.
The drill bit used to create a row of holes for the watering can. The drill bit has a central spike and 2 cutting edges on the side, like an auger (without the screw).
Marking the center spout hole — the drilling has begun! The new holes will be fairly close to the bucket lid so that most of the water can drain out when the bucket is tipped.
Using a utility razor knife to cut the fill hole. Not so easy as I thought the cut would be but the recessed plug ring helped guide the knife.
Happy DIY projects for your Habitat Food Forest. See you tomorrow.
First a video re “Planting Salvia spathacea next to Monica Manzanita Mannequin 2 of 2”, then some pics of “Monica Manzanita Mannequin animal habitat installation” (below the video):
Planting Salvia spathacea next to Monica Manzanita Mannequin 2 of 2 (video):
Monica Manzanita Mannequin animal habitat installation and planting Salvia spathacea (pics):
The west end of Cacti Caverns is cleared of lavarock. The “Monica” (species name) manzanita (Spanish for “little apple”) shrub will be planted on top of Cacti Caverns’ terra cotta flat roofing tiles.
The lower tile is slide under the top tile to make room for Monica Manzanita Mannequin animal habitat. Poor quality soil (high percentage of adobe clay) is removed to make room for planting (better quality) soil.
Tony’s last conversation with Monica Mannequin. Note the wavy wood grain, identifying the mass as a tree root burl. The “nose”, or upright projection (Hey, work with me here!), is the base of the trunk, which starts out a straight grain.
Monica Manzanita threaded through Mannequin. Soon critters will inhabit the inside vaulted ceilings and come and go through Mannequin’s crevices. A pole planted next to MMM serves as a handhold while traversing the walk path.
Monica manzanita a month after being planted. Looks happy to me! Not over watering is probably the biggest challenge this manzanita shrub will offer here in California, where it is a native plant.
After two healthy months, the typically very slowly growing shrub looks to be establishing itself. Grape Overpass is sporting bunches of green grapes that will ripen in a couple of months.
Hummingbird sage (Salvia spathacea) planted next to Monica Manzanita Mannequin habitat. The salvia, like the manzanita, is also a native plant that will thrive in the dry hydrozone garden bed.
Both hummingbird sage (Salvia spathacea) pose for a photo op next to Monica Manzanita Mannequin habitat. The critters will be happy!, especially in years to come when the manzanita tree canopies its undergrowth of hummingbird sage.
Happy animal habitat installations. See you tomorrow.
First a video re “Planting Garlic”, then some pics of “Young Garlic Plants AND Leaf Mulch” (below the video):
Planting Garlic 6 of 6 (video):
Young Garlic Plants AND Leaf Mulch (pics):
Rows of young garlic and yellow onion sprouts. The shallots, planted in the foreground soil (next to the collard), have yet to sprout – the best for last!
Garlic, yellow onion, shallots, and collard veggie bed along the sidewalk. Sure beats a lawn! Note the light covering of oak leaves as mulch, a good erosion protection from the winter rains.
Tree collard cuttings 3 weeks after propagation. Some cuttings have been chewed down by snails or slugs, but others are going to thrive past that onslaught of Nature. Sometimes you win, sometimes you lose. Plant enough cuttings to confuse the confounders! And, some of the collard cuttings will make it.
Shallot stalk, “Do you like my (oak leaf) hat?”
Rains are coming, so I fetched some sidewalk leaves to mulch the garlic/onion/shallots/collard veggie bed with. Cleaning up the sidewalk gives me plenty of rich, partially broken down leaves. The leaves were also used to extend the veggie bed in Tipped Wine Barrel (see blog entry next week?).
Garlic harvest from our sidewalk garden – Straw Bale Recliner Veggie Bed. Note how the garlic was rinsed to remove soil from the roots. The rack (a discarded baker’s tray) will allow the garlic to dry. Nice job, Frau Glory!
Happy mulching your veggie bed with leaves. See you tomorrow.
First a video re “Planting Garlic”, then some pics of “Garlic, Yellow Onions, and Shallots Planting Completed” (below the video):
Planting Garlic 5 of 6 (video):
Garlic, Yellow Onions, and Shallots Planting Completed (pics):
Straw Bale Recliner Veggie Bed planted with garlic, yellow onion, and shallots. The dark red dust is blood meal, an attempt to keep local cats from using the unmulched soil as a litter box.
A raccoon paw print IN THE BLOOD MEAL! The raccoon walked over the bed the first night of the planted crop. Well at least the soil does not look torn up by animals digging deeper in the soil or by cats using the veggie box as a litter box.
Happy planting garlic, onions, and shallots. See you tomorrow.
First a video re “Planting Garlic”, then some pics of “Garlic Bulbs Dusted with Spore” (below the video):
Planting Garlic 4 of 6 (video):
“Garlic Bulbs Dusted with Spore“ (pics):
A bucket is used to break apart garlic bulbs into individual gloves that will be planted. The garlic papers will be strewn on top of the planting bed’s soil for mulch and nutrition.
Garlic cloves are moistened with water to thinly coat with mycorrhizal spore.
Happy planting garlic, onions, and shallots. See you tomorrow.
The bounty of Hachiya persimmon from this year’s harvest. These picnic boxes and more!
Early morning sun on Hachiya persimmon leaves. These leaves have changed color (fall foliage) from their usual lush greens and are about to drop.
Our young persimmon tree grows alongside an established pine tree. Someday, we will climb the pine to harvest persimmon.
